Apium ensures that all the products are of the highest quality
Our product catalog consists of filaments, 3D printers for high-temperature polymers, and their spare parts
Check all the products below and request a quotation or directly place an order.
Apium ULTEM 9085 (PEI) is an unfilled engineering plastic with high strength and broad chemical resistance. This material has properties similar to Polyetheretherketone. It is cheaper than Polyetheretherketone with low impact strength and lower thermal resistance. This material is more attractive for applications in the aircraft industry due to its excellent flame retardancy.
|20cm x 20cm x 5cm (LxWxH)
Description of the Material:
Apium ULTEM 9085 (PEI) Natural, Ø1,75 mm. This material possesses the following properties:
- High thermal resistance
- High chemical resistance
- High-stress resistance
- Low weight
- Post-treatment possible
- Excellent Flame Retardancy
Drying of the Filament:
Many technical polymers are hygroscopic in nature which means they absorb moisture when exposed to the ambient air. Therefore, the filament must be actively dried before printing as it increases the strength and the surface quality of the printed part. Apium F300 is used as an inline dryer for industrial 3D printers. To learn more about Apium F300 click here.
Apium 3D printers that can process Apium ULTEM 9085 (PEI)
The patented technology of the thermal management systems makes the 3D printers best for processing high-performance polymers such as Ultem.
Apium ULTEM 9085 (PEI) is an amorphous polymer for aerospace applications. Besides that, the material is used for industrial applications.
- The data have been generated for Apium Additive Technologies in accordance with applicable national, international, and internal standards and are intended for material comparison.
- The typical values may vary depending on part geometry and processing parameters.
For further information and detailed data please contact us.
The materials, products, and services of Apium Additive Technologies GmbH are sold under consideration of the general terms and conditions, which are available on request. By providing the information contained in the data sheets, Apium Additive Technologies is acting in good faith. It is the responsibility of the customer to test and analyze the products for specific applications, suitability, performance, and safety in the end use. Furthermore, Apium Additive Technologies reserves the right to change the products’ specifications and packaging.
If this is not the right material for your application, Check out other materials here.